Project Report For Wire Drawing

Introduction

The project report for Wire Drawing is as follows.

Drawing with wires, Wire fabrication, typically from a rod or bar. Pointing the rod, propaganda the pointed end through a die, and attaching the end to a sketching block are the steps in the wire-drawing process. The block, which is powered by an electric motor, pulls the lubricated rod through the die, reducing its diameter and length. Because the decrease cannot be executed in a single draught, fine wire is produced on a multiple-block machine.

Wire drawing is a metalworking technique that reduces the bridge of a wire by pulling it through a single or series of sketching dies. Wire drawing has a wide range of applications, such as electrical equipment, cables, tension-loaded structural components, springs, paper clips, wheel spokes, and stringed musical equipment. Although the processes are similar, drawing differs from the extruder in that the wire is dragged through the die instead of pushed through it. Drawing is typically done at room temperature, making it a cold working process, but it can be done at higher temperatures for larger wires to decrease forces.

In theory, the wire drawing method is fairly simple. The wire is equipped by banging, filing, rolling, or bending the beginning of it so that it will fit through the die; the wire is then dragged through the die. Because the volume of the wire remains constant as it is dragged through the die, as the size decreases, the volume increased. To reach the desired size, the wire will generally require more than one pull through successively smaller dies. This is the foundation of the American wire gauge scale. This can be accomplished on a limited scale with a sketch plate or on a large industrial scale with automated equipment. Cold working alters the mechanical properties during the wire drawing process.

Market potential & Strategy

A wire drawing machine is a machine that is used to decrease the cross-section of a wire by dragging it through a sequence or single drawing die. The wire drawing machine is small in size but has a high drawing capacity. It is also suitable for a high-speed drawing for hydrating and freezing drawing wires. Aside from that, wire drawing equipment is used to draw wires into small diameters. These machines have numerous draw dies that are isolated by accruing drums between the dies. Wire drawing equipment can draw mild steel, stainless steel, carbon steel, aluminium, copper, and alloys. Aside from that, they are used to cut metallic mesh and steel wire into various diameters. Furthermore, the wire drawing machine operates at temperatures ranging from 300 to 700°C, depending on the operation purpose and user requirements. Furthermore, prior to drawing, the wires are heated to the required temperature using indirect resistance heating, gas-fired inductive heating, or heating.

During the forecast timeframe, the wire drawing equipment market is expected to be driven by growing industrial development in both developing and developed countries. Furthermore, wire drawing equipment is used in the production of electrical wiring, cables, and paper clips. This, in turn, is expected to increase demand for wire drawing machines around the world. The continuous increase in automobile production is another important factor that is aiding in the growth of the global wire drawing machines market.

The global wire drawing machines market is likely to grow during the forecast period due to consistent growth in demand for wire drawing machines due to the continual increase in demand for cars, consumer products, and heavy equipment or machinery. Producers of wet wire drawing machines and dry wire drawing machines accounted for the majority of the wire drawing equipment market in the product category. This is owing to an increase in global industrialization, which is expected to boost the market for wire drawing machines in the future years.

Sample Report

Need Help?

Create 100% Bankable Project Report